DMMS [Digital Moisture Measuring System]
Overview
Based on longterm practical experiences the moisture measuring sensors are made for the toughest operations and industrial applications. DMMS is especially suitable for challenging applications. Up to 16 sensors are able to communicate digitally with a central evaluation unit. Wiring becomes easy by using bustechnology. That makes it simple to upgrade the measuring points. The bussystem can manage a max. length of 1.200 meter which allows you to cover even spacious estates. The calibration is made online within the process, so after the sensor has already been installed.
DMMS Sensor
As a result the influences caused by the assembly situation can be immediately detected and compensated. The kind of measurement can be chosen for each sensor between continuous and batch operation (via start and stop signal). It's also possible to switch the material curves for each sensor (up to 16 different material curves per sensor). The transfer of the measuring values can be done digitally by Profibus DP or by analogue output (e.g. 4...20mA, 0...10V). If the sensor has to be replaced the calibration curves can be completely adopted there's no additional effort. In almost every kind of bulk material a precise determination of the moisture can be done, e.g. sand, minerals, clay, grain, food stuff, saw dust, ores, sewage sludge and so on.
Technical Details - DMMS Sensor
Physical measuring principle | Capacitive (determination with highfrequency leakage field, 16...22 MHz) |
Measuring range | Moisture: 0...100 %, Temperature: 20...120 °C (both ranges adjustable) |
Accuracy | +/ 0,1 % moisture (depending on material/sensor installation place) |
Mode | Continuous or batch measuring |
Ambient / material temperature | 4...80 °C |
Temperature compensation | of sensor electronic and material |
Measuring depth | ca. 150 mm (depending on material/compaction) |
Sensor dimensions | Ø = 76 mm / H = 70 mm |
Materials housing / wear protection | Stainless steel (1.4301), ceramic (ZrO2Al2O3) |
Protection class | IP68 |
Sensor mounting | Clamp flange (variable installation depth) |
Power supply | 24 V DC / 0,4 VA (per sensor) |
Sensor cable | LiYD11Y 6 x 0.14 mm2, shielded, 6m long |
DIGISYS evaluation unit | |
Output | Profibus DP or optional analogue standard signal (e.g. 4...20 mA) |
max. number of sensors | 16 |
Sensor communication | Sensor bus RS485 |
max. cable length | 400 m, resp. 1.200 m |
Bus cable | 2 x 2 x 0,25 mm 2 ,shielded twisted pair cable |
Bus connection box | IP66, aluminum housing (voltage supply, bus connection and addressing for up to 2 sensors) |
Requirements for calibration software | WIN 95 / 98 / ME / 2000 / XP / Vista / 7 / 8 / 10+ USB, RS232 or LAN connection |
Versions / Options |
Certification for explosionrisk area, ex zone 22 (II 3D Ex tD A22 IP6X
T85°C) Sensor with extended temperature range, up to 100°C Sensor for measurement in silo Sensor for measurement mixer Sensor housing made of acid proof stainless steel (1.4462) Digital inputs and outputs |
MMS [Universal moisture sensor]
Overview
The moisture measuring sensors are made for the toughest operations and industrial applications. The sensors are constructed based on long-terms practical experiences for permanent use. Without much effort it can be installed – also afterwards – into the process.
MMS Sensor
The moisture measuring sensors are made for the toughest operations and industrial applications. The sensors are constructed based on long-terms practical experiences for permanent use. Without much effort it can be installed – also afterwards – into the process.
Technical Details - DMMS Sensor
Physical measuring principial | capacitive (determination with high-frequency leakage field 27 MHz) |
Measuring range | Moisture: 0…100 % (adjustable) |
Accuracy | +/ 0,1 % moisture (depending on material/sensor installation place) |
Mode | Continuous or batch measuring |
Ambient / material temperature | 4...80 °C |
Temperature compensation | of sensor electronic and material |
Measuring depth | ca. 150 mm (depending on material/compaction) |
Sensor dimensions | Ø = 76 mm / H = 70 mm |
Materials housing / wear protection | Stainless steel (1.4301), ceramic (ZrO2Al2O3) |
Protection class | IP68 |
Sensor mounting | Clamp flange (variable installation depth) |
Power supply | 24 V DC / 0,4 VA (per sensor) |
Sensor cable | LiYD11Y 6 x 0.14 mm2, shielded, 6m long |
DIGISYS evaluation unit | |
Output | Profibus DP or optional analogue standard signal (e.g. 4...20 mA) |
max. number of sensors | 16 |
Sensor communication | Sensor bus RS485 |
max. cable length | 400 m, resp. 1.200 m |
Bus cable | 2 x 2 x 0,25 mm 2 ,shielded twisted pair cable |
Bus connection box | IP66, aluminum housing (voltage supply, bus connection and addressing for up to 2 sensors) |
Requirements for calibration software | WIN 95 / 98 / ME / 2000 / XP / Vista / 7 / 8 / 10+ USB, RS232 or LAN connection |
Versions / Options |
Certification for explosionrisk area, ex zone 22 (II 3D Ex tD A22 IP6X
T85°C) Sensor with extended temperature range, up to 100°C Sensor for measurement in silo Sensor for measurement mixer Sensor housing made of acid proof stainless steel (1.4462) Digital inputs and outputs |